Subframes and Connectors

 



Qty. Model- Manufacturer Product Image Item Name Price
1 Metco MDL2700 Driveshaft Loop Metco Driveshaft Safety Loop 05-up Challenger,Charger,300,Magnum

Metco Driveshaft Safety Loop 05-up Challenger,Charger,300,Magnum

The installation is very simple as the loop mount fastens to the transmission crossmember using the supplied bolts and spacers. The mounting bracket fits neatly in the notch at the rear of the transmission tail shaft. The hoop attaches to the top of the mount inside the tunnel, around the driveshaft. All mounting hardware is included. Some features of this driveshaft loop: - does not require the removal of the driveshaft for installation - design is compatible with aftermarket exhaust systems - no welding required ... bolts-in with included hardware Please Note: As of 5/2009, the main bracket...
$129.95

Add:

1 Speedlogix HC-KM K Member Speedlogix Tubular Chromoly K-Member 11-up Challenger,Charger,300

Tubular Chromoly K-Member 11-up Challenger,Charger,300

Tubular k-member is made out of Chromoly and powder coated for a durable black wrinkle finish. Extensive design, development and testing has been done, including FEA (Finite Element Analysis) to OEM standards. The factory k-member 36.5 lbs. This tubular version is 16.5 lbs, for a savings of 20 lbs. This package will convert your vehicle to solid motor mounts by using Mopar motor mount adapters. This Hellcat K-Member Package comes with the following: Tubular K-Member05-10 Mopar Mount Adapters05-10 Speedlogix Solid Motor Mounts
$995.95

Add:

1 Speedlogix 306-5014 Connectors Speedlogix Tubular Matrix Brace Subframe Connector 05-up Charger,300,Magnum

Tubular Matrix Brace Subframe Connector 05-up Charger,300,Magnum

Install these sub-frame connectors and improve handling. We use round chrome-moly tubing and these sub-frame connectors are designed to have no ground clearance issues. We spent countless hours figuring out where the LX cars could benefit most from chassis stiffening. Here is the end result....Made from 4130 Chrome Moly material this brace is specifically designed for the LX Chassis cars. It ties together the inner/outer frame rails and the rear lower control arm mount. Braces are bare metal but can be powdercoated or painted for a long lasting finish. For maximum benefit these bars must be...
$379.95

Add:

1 Speedlogix Tunnel Brace LX-TBR Speedlogix Tubular Rear Tunnel Brace 11-up Chrysler 300, Dodge Charger

Tubular Rear Tunnel Brace 11-up Chrysler 300, Dodge Charger

Our chassis matrix tunnel brace is a direct replacement for the factory stamped steel unit and provides additional clearance for most larger diameter exhaust systems while still providing ample ground clearance.
$99.95

Add:

1 Speedlogix LXLC-TMA Trans Mount Speedlogix Tubular Transmission Cross-Member 05-14 LX Cars,Challenger

Tubular Transmission Cross-Member 05-14 LX Cars,Challenger

Here is our brand new Automatic transmission crossmember. It is built with 4130 Chro-Moly Tubing ( our competitors use mild steel which is weaker, less expensive and heavier). We also used multiple tubes in a triangulated design making for a much more rigid part. By incorporating Chro-Moly we were able to build a stronger, more rigid part and still be 3lbs lighter than stock.
$184.95

Add:

1 Speedlogix 306-ATCM-8 Mount Speedlogix Tubular Transmission Cross-Member 15+ 300,Charger,Challenger 8SP

Tubular Transmission Cross-Member 15+ 300,Charger,Challenger 8SP

Here is our brand new Automatic transmission crossmember. It is built with 4130 Chro-Moly Tubing ( our competitors use mild steel which is weaker, less expensive and heavier). We also used multiple tubes in a triangulated design making for a much more rigid part. By incorporating Chro-Moly we were able to build a stronger, more rigid part and still be 3lbs lighter than stock. DOES NOT FIT HELLCATS with Auto Transmissions!
$184.95

Add:



Copyright © 2017 3rd Strike Performance. Powered by Zen Cart