Intake Manifolds

 



Qty. Model- Manufacturer Product Image Item Name Price
1 Inertia 6.1L Intake Manifold Inertia Motorsports 3rd Strike-Inertia Ported & Polished 6.1L SRT-8 Intake Manifold

3rd Strike-Inertia Ported & Polished 6.1L SRT-8 Intake Manifold

Port Matched for maximum flow without losing runner velocity, our Ported & Polished SRT-8 intake manifolds will give you that extra edge when it comes to maximizing the performance of your SRT-8. Core Charge Applies: A fully refundable $600.00 core charge will be applied if we are shipping you a pre-ported and polished intake. The $600.00 will be refunded upon return within 30 days of your stock intake in fully undamaged, reusable condition. Cleaning required. Please do not send in an oil soaked intake. Lead time of 2-3 weeks for porting/polishing. If you are having the intake...
$2,595.95

... more info

1 MM-3A 5.7 Eagle Intake Adapters Modern Muscle 5.7 Eagle Intake Adapters for early 5.7 Heads

5.7 Eagle Intake Adapters for early 5.7 Heads

5.7 Eagle intake to early (05-08) 5.7 head port adapters These are made for unported intake and heads Viton o-rings on head side No o-rings on intake side (o-rings in factory intake) Intake Bolts Included 6061 T6 aluminum
$299.95

... more info

1 MM-5A Adapter Plates 5.7 Intake Modern Muscle 5.7 Early Intake Adapters to Eagle or 6.1 Heads

5.7 Early Intake Adapters to Eagle or 6.1 Heads

5.7 early (05-08) intake to Eagle or 6.1 heads These are made for unported intake and heads Viton o-rings on head side No o-rings on intake side (o-rings in factory intake) Intake Bolts 6061 T6 aluminum
$299.95

... more info

1 Mopar P5153340 Carb Conversion Mopar Performance 5.7L HEMI Conversion Package Carbureted Intake Kit

5.7L HEMI Conversion Package Carbureted Intake Kit

Mopar now has conversion packages in stock for customers looking to install a 2004 or earlier model year 5.7L HEMI engine into an older car or truck. Available in both carbureted and MPI versions, these packages have all the necessary fuel, intake and electrical management system components you need. Packages replace the factory plastic intake manifold and drive-by-wire throttle body with a more user-friendly aluminum intake and top-feed, cable-driven throttle body or carburetor, and include all of the gaskets, hoses and clamps necessary to complete the installation. Features: - Factory...
$4,359.95

... more info

1 Mopar P5153339 MPI Conversion Mopar Performance 5.7L HEMI Conversion Package Fuel Injection Intake Kit

5.7L HEMI Conversion Package Fuel Injection Intake Kit

Mopar now has conversion packages in stock for customers looking to install a 2004 or earlier model year 5.7L HEMI engine into an older car or truck. Available in both carbureted and MPI versions, these packages have all the necessary fuel, intake and electrical management system components you need. Packages replace the factory plastic intake manifold and drive-by-wire throttle body with a more user-friendly aluminum intake and top-feed, cable-driven throttle body or carburetor, and include all of the gaskets, hoses and clamps necessary to complete the installation. Features: - Factory...
$4,659.95

... more info

1 MM-2B 6.1 Intake Install Kit Modern Muscle 6.1 Intake Install Kit 03-08 Dodge Ram 5.7L

6.1 Intake Install Kit 03-08 Dodge Ram 5.7L

Moves your alternator and AC to the side to allow installation of a car style intake on a RAM truck application. Package includes new water pump and idlers. Timing cover core required for exchange.
$795.95

... more info

1 MM-2A Intake Adapters Early 5.7L Modern Muscle 6.1L Intake Adapters for early 5.7 Heads

6.1L Intake Adapters for early 5.7 Heads

6.1 intake to early (05-08) 5.7 head port adapters These are made for unported intake and heads Viton o-rings 6061 T6 aluminum Intake Bolts
$299.95

Add:

1 MM-1A Intake Adapters 6.1 to 5.7 Modern Muscle 6.1L Intake Thermal Adapters for 5.7 Heads

6.1L Intake Thermal Adapters for 5.7 Heads

We are happy to release our new adapters for the 5.7 guys/gals wanting to run 6.1 intake manifolds. Now, some of you may be thinking to yourselves "why is the adapter raised around the port?" That's not an optical illusion... we designed these to be used with thermal gaskets in order to give the user the best possible combination of parts and more importantly... power. Introductory pricing will be $345 for the adapter/gasket combo Intake Bolts Now Included! If you are not interested in the thermal gaskets, we offer standard adapters.
$349.95

Add:

1 Edelbrock 75284 Race Manifold Edelbrock Edelbrock 5.7L Hemi Dual Quad Race Intake Manifold

Edelbrock 5.7L Hemi Dual Quad Race Intake Manifold

Edelbrock 75284 BB Chrysler RPM Air Gap Dual-Quad Intake Manifold 1500-6000 rpm Classic Mopar 5.7L Hemi Street/Hi Performance Use Only Endurashine Designed for the new Chrysler 5.7L Hemi, this manifold is perfect for those looking to swap this modern powerplant into their classic Chrysler or street rod. Our RPM Air-Gap Dual-Quad manifold added over 30 ft/lbs. of torque when tested on the Chrysler p/n P4510594 crate engine. The dual-quads make great power while providing a nostalgic look. Timing control module sold separately. Carburetor Recommendations: Edelbrock Thunder Series AVS or...
$529.95

Add:

1 Edelbrock 20764 Race Manifold Edelbrock Edelbrock Performer 5.7L Hemi RPM Dual Quad Manifold w/Carbs

Edelbrock Performer 5.7L Hemi RPM Dual Quad Manifold w/Carbs

Convert from a single carburetor setup to a powerful dual-quad carburetor intake system. These Edelbrock Performer RPM Dual Quad Air-Gap manifold and carburetor kits provide everything needed to convert from a single carburetor intake to a powerful dual-quad carburetor intake system for small block Chevys. These kits include the new RPM Dual Quad Air-Gap intake, two 500 cfm Thunder Series AVS carburetors (one manual choke, one electric choke), Edelbrock high-tech progressive throttle linkage, a fuel line, and intake manifold gaskets. These kits are available in your choice of natural or the...
$1,499.95

... more info

1 Edelbrock 2076 Race Manifold Edelbrock Edelbrock Performer 5.7L Hemi RPM Dual Quad Manifold w/Carbs

Edelbrock Performer 5.7L Hemi RPM Dual Quad Manifold w/Carbs

Convert from a single carburetor setup to a powerful dual-quad carburetor intake system. These Edelbrock Performer RPM Dual Quad Air-Gap manifold and carburetor kits provide everything needed to convert from a single carburetor intake to a powerful dual-quad carburetor intake system for small block Chevys. These kits include the new RPM Dual Quad Air-Gap intake, two 500 cfm Thunder Series AVS carburetors (one manual choke, one electric choke), Edelbrock high-tech progressive throttle linkage, a fuel line, and intake manifold gaskets. These kits are available in your choice of natural or the...
$1,250.95

Add:

1 Hilborn EFI-6.1CH8/EL Intake Kit Hilborn Hilborn Chrysler 5.7L and 6.1L Hemi EFI Kit

Hilborn Chrysler 5.7L and 6.1L Hemi EFI Kit

This EFI kit includes an ECU that allows you to tune your engine simply and accurately without a laptop computer. The fuel injector manifold features a split throttle shaft design for smooth performance with gasoline set-ups. STANDARD EFI KIT INCLUDES THESE ITEMS: Fuel injector manifold assembled with TPS, fuel rails, & vacuum kit, injectors, wiring harness, Carabine ECU, two fuel filters, steel ram tubes, Weldon electric fuel pump and pressure regulator, and an MSD tach adapter. The entire package is factory tested on a wet flow bench to match the engine fuel flow requirements and comes...
$5,529.95

... more info

1 Mopar 4510581 Carb Manifold Mopar Performance Mopar 5.7L Crate Motor Carbureted Single Plane Intake Manifold

Mopar 5.7L Crate Motor Carbureted Single Plane Intake Manifold

5.7L Crate Engine Single Plane Manifolds — both Carb and EFI versions. EFI version is machined to accept injectors and MAP sensor. Both are drilled with the standard Holley pattern. Notes: For 5.7L Hemi. Not legal for sale on pollution-controlled vehicles or vehicles registered for highway use in California.
$999.95

... more info

1 Mopar 4510582 Carb Manifold Mopar Performance Mopar 5.7L Crate Motor EFI Single Plane Intake Manifold

Mopar 5.7L Crate Motor EFI Single Plane Intake Manifold

5.7L Crate Engine Single Plane Manifolds — both Carb and EFI versions. EFI version is machined to accept injectors and MAP sensor. Both are drilled with the standard Holley pattern. Notes: For 5.7L Hemi. Not legal for sale on pollution-controlled vehicles or vehicles registered for highway use in California.
$999.95

... more info

1 Mopar 6.1L Manifold Mopar Performance Mopar 6.1L Intake Aluminum Manifold

Mopar 6.1L Intake Aluminum Manifold

Adding a Mopar 6.1L intake manifold to your 5.7L HEMI engine will increase its horsepower and torque. This price is for a used manifold. Mopar has discontinued this item and they are getting harder and harder to find... this is a bare intake. Does not include throttle body or accessories.
$1,595.00

... more info

1 Mopar P5153556 DualQuad Manifold Mopar Performance Mopar Performance Dual Intake Quad Manifold (5.7L Hemi)

Mopar Performance Dual Intake Quad Manifold (5.7L Hemi)

Intake Manifold, Aluminum, Dual Plane, Dual Quad, Accepts AFB / AVS Style Carburetors. Use with Carburetor and Linkage Kit P5153904, 5.7L Hemi (2003-2008). This Dual Plane Mid-Riser Intake Manifold can accept two Edelbrock or AFB-style carburetors. Notes: For 5.7L Hemi. Not legal for sale on pollution-controlled vehicles or vehicles registered for highway use.
$449.95

... more info

1 RDP Dual Throttle Body Intake RDP RDP Billet Inlet Manifold Suit 6.1 and 5.7 Hemi

RDP Billet Inlet Manifold Suit 6.1 and 5.7 Hemi

RDP Motorsport Released our Patent Pending Billet Inlet Manifold for the Hemi 6.1 Motor, Specialy designed for both naturally aspirated motors as well as forced Induction. Our manifold features a full billet cnc finish with our Billet fuel rails and is setup for twin 80 to 85mm throttle bodies and we can also supply a adaptor to run either a single 90mm or twin 90mm throttle bodies as well. The unit features a backfire plate as well as multipul vaccum ports and is also offered with a direct port nitrous port system installed as well. Unit is cnc machined to be able to be port matched to any...
$4,795.95

Add:

1 RDP Sheetmetal Intake Manifold RDP RDP Sheetmetal Intake Manifold 6.1 and 5.7 Hemi

RDP Sheetmetal Intake Manifold 6.1 and 5.7 Hemi

$3,995.95

Add:

1 Edelbrock 8528 Manifold Bolts Edelbrock Edelbrock Intake Manifold Bolt Kit 5.7L and 6.1L Hemi

Edelbrock Intake Manifold Bolt Kit 5.7L and 6.1L Hemi

Finish the job right with Edelbrock quality bolt and washer kits. Edelbrock intake manifold bolts are designed specifically to work with their manifolds, including the Performer, Performer RPM, and Torker series. They feature reduced-hex heads for easy wrench access, an attractive cadmium finish for corrosion resistance, and hardened washers. All bolts and washers needed for manifold installation are included in these kits.
$16.95

Add:

1 FelPro MS96574 Intake Gasket Fel-Pro FEL-PRO Intake Manifold Gasket 5.7L Hemi

FEL-PRO Intake Manifold Gasket 5.7L Hemi

FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; With Felpro's limited 1-year warranty.
$15.95

... more info

1 Metco MBR0012 Crankcase Vent Metco Billet Crank Case Breather 5.7L and 6.1L Hemi Motor

Metco Billet Crank Case Breather 5.7L and 6.1L Hemi Motor

This crank case breather assembly replaces the cap on the oil fill tube located on the driver's side of the intake of the late model Hemi engine. The base of the breather is CNC-machined from billet aluminum for precise fit, and the included silicone O-ring is specially designed to prevent oil seepage at the base of the breather. The filter base is microfinished for surface protection and good looks, and is easily hand-polished to a mirror-like appearance. The removable filter element is a high-quality reusable unit from S & B Filters, and is securely retained in the filter base by a...
$56.99

Add:

1 Metco MBR0012-10 Adapter Metco Billet Valve Cover -10AN Adapter 5.7L and 6.1L Hemi

Metco Billet Valve Cover -10AN Adapter 5.7L and 6.1L Hemi

This valve cover adapter replaces the original oil fill tube on the factory valve cover.  It is CNC-machined from billet aluminum for precise fit, and the included silicone O-ring is specially designed to prevent oil seepage at the base of the adapter. The top of the adapter is machined to accept a #10AN hose end to facillitate the installation of a custom crank case evacuation system, PCV system, or for use with a vacuum pump. Total adapter length is 2.10". Installation: Each Metco Valve Cover Breather is engineered to fit your specific vehicle! Detailed installation instructions...
$56.99

Add:



Copyright © 2017 3rd Strike Performance. Powered by Zen Cart