Dodge Truck Owners Information




Qty. Model- Manufacturer Product Image Item Name Price
0 Black Magic 180 Fan Installation 3SP Black Magic 180 Fan Installation Instuctions with Factory shroud

Black Magic 180 Fan Installation Instuctions with Factory shroud

1. Disconnect the negative battery cable 2. Clamp a large pair of vise grips onto the water pump pulley, with the handles facing inwards. Using a pipe wrench or adjustable wrench, turn the fan nut counter clockwise. It may need a little extra umph at first to get it broke loose, but it will turn off by hand afterwards. Remove and set aside. 3. Using a 10mm wrench, remove the overflow/windshield washer bottles from the shroud. 4. Remove the two bolts at the top of the shroud, one on each side, using a 13mm deep well and ratchet. 5. Tilt inwards the engine, slip the Black Magic 180 into the...


Add:

0 Bolt Pattern Guide Dodge-Jeep 3SP Bolt Pattern Guide for Dodge Trucks and Jeeps

Bolt Pattern Guide for Dodge Trucks and Jeeps

First of all, just what is meant by "bolt pattern"? Each wheel has a different bolt pattern, and some wheels even have 2 different bolt patterns which allow it to be mounted on a wider range of vehicles (not that all OEM / factory wheels have only 1 bolt pattern). Most Bolt Patterns are represented in the following manner: 5x114.3 (or 5x4.5, which is the same as 5x114.3 just measured in inches) * The "5" indicates the number of holes in the wheel for the bolts to enter and mount the wheel onto the car. * The "114.3" indicates the diameter of the bolt circle...


Add:

0 Dodge Hemi Truck Information 3SP Dodge Hemi Truck Information and Installation Instructions

Dodge Hemi Truck Information and Installation Instructions

Flashpaq Advanced Data Acquisition Instruction Manual Flashpaq What's New? 3815 Flashpaq release notes All model Flashpaq release notes Dodge Ram Truck Technical Service Bulletins Sylvania Lamp Replacement Guide Mopar Electrical Application Guide


Add:

0 Gear Ratio Conversion Chart 3SP Gear Ratio Conversion Chart Guide

Gear Ratio Conversion Chart Guide

When ever you change tire size from the original size to another there will be a direct effect on power and drivability. We have developed this chart to help you select the optimum gear ratio to put your performance back where you want it. Using the chart below, first determine your original gear ratio and tire size and follow to the intersection that should be your approximate RPM at 65 MPH. Next find your new tire size and follow that across to the closest RPM to your original and that will be first choice.  If you are interested in a change that will give more power or better fuel mileage...


Add:

0 Factory paint codes 3SP How do I find my factory paint code?

How do I find my factory paint code?

To locate your specific paint code, please look for the sticker (similar to the one pictured) on the inside edge of your driver's door jam. All Daimler-Chrysler paint codes are prefixed by the letter "P". In the example shown, the paint code is "B5" which is Electric Blue. The following table lists available colors for the 2002-Up Dodge Ram: Dodge Ram Color Description  Paint Code Year(s) Available Atlantic Blue PearlBJ2002-2006BlackX82002-2006Blaze Red / Inferno Red CrystalRH2006-UpBright Silver MetallicS22002-UpBright WhiteW72002-UpBrilliant Black CrystalXR2007Cool...


Add:

0 Intake Installation Instructions 3SP Intake Installation Instructions 4.7 Magnum/5.7 Hemi Dodge Ram

Intake Installation Instructions 4.7 Magnum/5.7 Hemi Dodge Ram

Installation instructions: 1. Assemble and install the heat shield first. 2. Install the tubing. 3. Install the filter. **Do this before installation of the heat shield: **Installation of the throttle body spacer is simple. Put a small dab of silicone in 4 spots around the circumfance of the groove in the throttle body spacer and install the gasket ring. Let dry while you do all the following, but before you install the intake tube, you will need to install the throttle body.** The large rubber piece goes around the hole of the heat shield. The smaller piece across the top. After you put...


Add:

0 Ring - Pinion Application Chart Ring and Pinion Application Chart

Ring and Pinion Application Chart

Ring and Pinion Application Chart When selecting a Gear Ratio, you should consider the following: 1. Tire Size2. Transmission Ratio 3. Final Gear Ratio 4. Engine RPM at Cruise Speed The following formula has been developed to calculate the optimum final Gear Ratio to suit your application. M.P.H. X Gear Ratio   Tire Diameter X 336 = rpm____________________ The chart shown below shows RPM calculations at 55 MPH for various combinations of final Gear Ratio and Tire Diameter. According to this chart, the acceptable RPM range is 2000-3000 which is represented by the entire shaded area of the...


Add:

0 Tire Fitment Guide 3SP Tire Fitment Guide

Tire Fitment Guide



Add:



Copyright © 2018 3rd Strike Performance. Powered by Zen Cart