Valvetrain




Model Manufacturer- Product Image Item Name Price
Cal/RR 837013506027 Compressor 3rd Strike Adjustable 8" Universal Valve Spring Compressor

Adjustable 8" Universal Valve Spring Compressor

This 8" adjustable valve Spring Compressor is designed to compress valve springs on overhead valve engines. The direct action compressor lever gives better visibility of valve spring retainers located in difficult access areas. There is a jaw opening of 1-3/8" to 5-5/8" (35mm to 142mm) and a throat clearance of 5-7/8" (150mm).
$25.95

Add:

Comp Cams 26915-16 Valve Springs Competition Cams Comp Cams Gen III Hemi Beehive Valve Springs 313 Lbs

Comp Cams Gen III Hemi Beehive Valve Springs 313 Lbs

With a .600" maximum lift, these Beehive™ Valve Springs were designed for hydraulic roller cams. COMP Cams® Beehive™ Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive™ shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train...
$195.95

Add:

Comp Cams 26918-16 Valve Springs Competition Cams Comp Cams Gen III Hemi Beehive Valve Springs 372 Lbs

Comp Cams Gen III Hemi Beehive Valve Springs 372 Lbs

With a .625" maximum lift, these Beehive™ Valve Springs were designed for hydraulic roller cams in Gen III Hemi engines. COMP Cams® Beehive™ Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive™ shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest...
$206.95

Add:

Comp Cams 7914-16 Pushrods Competition Cams Comp Cams Gen III Hemi Hi-Tech Chromemoly Pushrods

Comp Cams Gen III Hemi Hi-Tech Chromemoly Pushrods

The pushrod is one of the most important pieces of the valve train, but all too often it’s taken for granted. Pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the parts in the valve train, as well as the rpm at which the engine will be run. Today’s all-out race engines demand the highest quality components at every step, and COMP Cams® Hi-Tech™ Pushrods fill that requirement. Hi-Tech™ Pushrods feature a one-piece design from .080” wall, seamless chromemoly tubing that ensures the ultimate in strength and...
$147.95

Add:

Comp Cams 7969-8 Pushrod Competition Cams Comp Cams Gen III Hemi Hi-Tech Pushrods Set of 8

Comp Cams Gen III Hemi Hi-Tech Pushrods Set of 8

The pushrod is one of the most important pieces of the valve train, but all too often it’s taken for granted. Pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the parts in the valve train, as well as the rpm at which the engine will be run. Today’s all-out race engines demand the highest quality components at every step, and COMP Cams® Hi-Tech™ Pushrods fill that requirement. Hi-Tech™ Pushrods feature a one-piece design from .080” wall, seamless chromemoly tubing that ensures the ultimate in strength and...
$85.95

Add:

Comp Cams 761-16 Valve Retainter Competition Cams Comp Cams Gen III Hemi Steel Valve Spring Retainers

Comp Cams Gen III Hemi Steel Valve Spring Retainers

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs. New COMP Cams® Steel Retainers are the perfect solution to this problem. COMP® engineers used 3D CAD with FEA to design retainers with a modern and advanced contoured top profiling for lower stress, increased lift and a reduction in mass. The retainers are CNC-machined to exact tolerances using CAD/CAM software. All COMP® retainers use only high-grade SAE 4140 chromemoly steel with no lead, <0.04% sulfur and a black oxide finish to prevent corrosion. These precision retainers are...
$53.95

Add:

Comp Cams 762-16 Valve Retainter Competition Cams Comp Cams Gen III Hemi Titanium Valve Spring Retainers

Comp Cams Gen III Hemi Titanium Valve Spring Retainers

Upgrading to these 7° COMP Cams® titanium valve spring retainers for Chrysler Gen III Hemi applications with #26915 or #26918 Valve Springs will often allow you to gain speed and power because titanium retainers are lighter and stronger than most steel ones. Additionally, our Super Lock™ titanium design gives you confidence; no longer will you be preoccupied with splitting a retainer and tearing up an engine when turning 10,000 RPM. These COMP Cams® titanium retainers are made from the finest 6AL4V alloy for maximum stiffness and minimal warpage. The 6AL4V alloy is heat-treated and processed...
$239.95

Add:

Crane 99476-1 Compressor Tool Crane Cams Crane Valve Spring Compressor Tools Gen 3 HEMI

Crane Valve Spring Compressor Tools Gen 3 HEMI

These Crane valve spring compressor tools remove and replace valve springs on most popular engines using stud-mounted rocker arms with the cylinder heads mounted on the engine. They are made from extra-sturdy steel with added leverage for easy use.  
$168.00

Add:

DNJ Engine VGE1160 Valve Guides DNJ Engine Valve Guide Exhaust 5.7L Hemi

DNJ Engine Valve Guide Exhaust 5.7L Hemi

Fits 5.7L Hemi Exhaust Valve - Set of 8 Warranty Duration: 1 year Warranty Type: Manufacturer Warranty  
$32.00

Add:

DNJ Engine VGI1160 Valve Guides DNJ Engine Valve Guide Intake 5.7L Hemi

DNJ Engine Valve Guide Intake 5.7L Hemi

Fits 5.7L Hemi Intake Valve - Set of 8 Warranty Duration: 1 year Warranty Type: Manufacturer Warranty
$32.00

Add:

MOPAR 53010515AA Valve Locks Mopar Performance Engine Valve Spring Retainer Keeper 5.7L-6.1L-6.4L Hemi

Engine Valve Spring Retainer Keeper 5.7L-6.1L-6.4L Hemi

Genuine MOPAR OEM part. Replacement 6.1L Valve Locks - Sold As set of 6 (16 Required per Cylinder Head - 32 Required for Both Heads)
$11.95

Add:

MOPAR 53010515AA Valve Locks Mopar Performance Engine Valve Spring Retainer Keeper 5.7L-6.1L-6.4L Hemi

Engine Valve Spring Retainer Keeper 5.7L-6.1L-6.4L Hemi

Genuine MOPAR OEM part. Replacement 6.1L Valve Locks - Sold As set of 32, the amount Required for Both Heads
$63.95

Add:

Fel Pro SS72914 Valve Stems Fel-Pro Fel-Pro Valve Stem Seal Set 5.7L Hemi

Fel-Pro Valve Stem Seal Set 5.7L Hemi

Manufacturer Information Fel-Pro Gaskets are engineered to deliver a perfect seal on every engine. That's why virtually every NASCAR and NHRA Drag Racing team - as well as a vast majority of professional engine rebuilders and vehicle service technicians - choose Fel-Pro over every other gasket brand. 1 year limited warranty UPC: 614046863484 2008-2005 CHR V8 5654cc 5.7L 2008-2003 DT L/D V8 5654cc 5.7L 2008-2005 JEE L/D V8 5654cc 5.7L
$25.00

Add:

Gen III Hemi Lifting Bracket 3rd Strike Gen 3 Hemi Lifting Bracket Kit 5.7L,6.1L,6.4L Hemi

Gen 3 Hemi Lifting Bracket Kit 5.7L,6.1L,6.4L Hemi

Guys, ever try to pick one of these engines up????  It’s almost impossible!!!  You can wrap chains or straps around the exhaust manifolds; that’s not safe! You can’t grab it by the intake, it's plastic. You can't grab it by the intake manifold bolts; they’re too small!!! You can go buy the dealership tool for $149.15 list price, but that requires you to remove the intake manifold and grab it by the block in the valley.  Who’s got time for that!!!!! Powergrid is proud to present a safe and innovative way to pick up your New Hemi.  The Hemi Grabber from Hemi Headquarters!!! Engineered...
$79.99

Add:

Harland Sharp CSP-S72265K Rocker Harland Sharp Harland Sharp 5.7-6.1L HEMI Full Roller Rocker Arm Kit

Harland Sharp 5.7-6.1L HEMI Full Roller Rocker Arm Kit

The wait is finally over. The 5.7-6.1L HEMI Full Roller Rocker Arm Kits by Harland Sharp are here! This complete non-adjustable rocker arm kit is available in the stock 1.65:1 ratio. Features & Specs: Billet 2024 Aluminum Bodies Needle Bearing Fulcrums and Roller Tips 5/8” Diameter Shafts With Factory Oiling Billet Steel Spacers and Hold Downs Fits Under Stock Valve Covers with minor modifications Uses Factory Length Pushrods Factory Ratio 1.65:1 Harland Sharp is committed to 100% Made in the USA. All materials are from USA resources. Every machining step is performed in the USA. Every...
$1,699.95

... more info

Lisle 16750 Spring Compressor Lisle Lisle On Car Valve Spring Compressor

Lisle On Car Valve Spring Compressor

Product Features·  Makes compressing the spring and removing the keepers a simple job ·  No need to remove the cylinder head ·  Adjustable cam action ·  No need to readjust the tool after each spring ·  Use with putting compressed air into the spark plug hole to hold up valves Product DescriptionValve spring compressor tool for replacing valve stem seals or valve springs quickly and easily.
$39.95

Add:

Manley 26570 Pushrod Set Manley Manley 26570 Push Rods 5.7 Hemi

Manley 26570 Push Rods 5.7 Hemi

These pushrods will work for all Chrysler/Dodge 5.7 HEMI Engines. These High Strength 4130 5/16" Steel Push rods upgrade to a solid 1 piece push rod over the factory 3 piece versions. Comes complete w/ 8 Intake (6.600) and 8 exhaust (7.825) Push rods. Availability:  direct from Manley Shipping charges shown are for delivery within the Continental U.S. only. Shipment to other areas may be higher, and will be confirmed with you prior to shipment.
$139.95

Add:

Manley 26610 Pushrod Set Manley Manley 26610 Push Rods 6.1 Hemi

Manley 26610 Push Rods 6.1 Hemi

These pushrods will work for all Chrysler/Dodge 6.1 HEMI Engines. These High Strength 4130 5/16" Steel Push rods upgrade to a solid 1 piece push rod over the factory 3 piece versions. Comes complete w/ 8 Intake and 8 exhaust Push rods. Availability:  direct from Manley Shipping charges shown are for delivery within the Continental U.S. only. Shipment to other areas may be higher, and will be confirmed with you prior to shipment.
$139.95

Add:

Manley 23629-16 Valve Retainers Manley Manley Lightweight Titanium Retainers 5.7/6.1L Hemi

Manley Lightweight Titanium Retainers 5.7/6.1L Hemi

Manley titanium valve spring retainers are a great way to lighten your valvetrain, in order to rev higher and make more power. They're manufactured in Manley's own CNC turning centers from special heat-treated 6AL 4V titanium alloy, selected to deliver maximum strength and reliability. These retainers are excellent for all types of racing, and are designed for valve stem locks with a 10 degree taper. Squeeze more RPM's out of your engine Avoid valve float Lightweight retainer that does not sacrifice reliability 16 grams - compared to normal 19 to 21 grams Special heat treated titanium for...
$185.95

Add:

Manley 221430-16 Valve Springs Manley Manley NexTek 5.7/6.1L Hemi Valve Springs

Manley NexTek 5.7/6.1L Hemi Valve Springs

Knowledgeable engine builders will tell you that valve springs are among the most critically important components of any engine. You should know that Manley's new NexTek valve springs are designed and manufactured for optimum consistency, run after run, lap after lap. They are proven to have less load loss than other springs on the market, exhibiting superior fatigue life and enhancing valvetrain stability. Everything that counts in winning races. Specially processed premium-grade chrome silicon that is virtually free of impurities or surface irregularities State-of-the-art winding, thermal...
$265.95

Add:

Mopar Exhaust Springs Pushrods Mopar Performance Mopar 6.1L Hemi Exhaust Valve Springs and Pushrods Kit

Mopar 6.1L Hemi Exhaust Valve Springs and Pushrods Kit

The factory 6.1L Exhaust Valve Spings used by many 5.7L Hemi engines with aftermarket camshafts. For factory replacement in a 5.7L or 6.1L, order 1 of these. Replaces both the exhaust and intake springs. Can be used as 6.1 replacement components or in place of factory 5.7 springs as a heavy duty spring upgrade. Also includes pushrods for both the intake and exhaust sides of the engine
$319.95

Add:

Mopar 6.1 Composite Valve Cover Mopar Performance Mopar Composite Valve Cover 2006-up 5.7L/6.1L/6.4L Hemi

Mopar Composite Valve Cover 2006-up 5.7L/6.1L/6.4L Hemi

These are the same covers featured on the 05-07 6.1 Hemi Engines including the SRT8 Series 300, Magnum, Charger, and Grand Cherokee. Includes (1) OE Mopar 6.1 Hemi Composite Valve Cover complete with mounting bolts and gaskets. Although these are designed for the 6.1 heads they also fit the MDS 5.7 Heads with no modification required. If you want to upgrade to the new coilpacks which eliminate the spark plug wires on the 03-05 5.7 Hemi engines these valve covers are required. I have complete conversion kits if you are interested in this conversion. Note***This is for ONE valve cover!***...
$135.00

Add:

Mopar 5037475AC Exhaust Pushrods Mopar Performance Mopar Performance 6.1L Hemi Exhaust Push Rods set of 8

Mopar Performance 6.1L Hemi Exhaust Push Rods set of 8

The factory 6.1L Exhaust Push Rods used by many 5.7L Hemi engines with aftermarket camshafts.
$99.95

Add:

Mopar 5037477AC Exhaust Springs Mopar Performance Mopar Performance 6.1L Hemi Exhaust Valve Springs set of 16

Mopar Performance 6.1L Hemi Exhaust Valve Springs set of 16

The factory 6.1L Exhaust Valve Spings used by many 5.7L Hemi engines with aftermarket camshafts. For factory replacement in a 5.7L or 6.1L, order 1 of these. Replaces both the exhaust and intake springs. Can be used as 6.1 replacement components or in place of factory 5.7 springs as a heavy duty spring upgrade. OE quality at aftermarket pricing. Can be used with OE 6.1 Cams, OE 5.7 Cams, Comp 260, and Comp 268 cams without problems.
$129.95

Add:

Mopar 5037476AC Intake Pushrods Mopar Performance Mopar Performance 6.1L Hemi Intake Pushrods set of 8

Mopar Performance 6.1L Hemi Intake Pushrods set of 8

The factory 6.1L Intake Pushrods used by many 5.7L Hemi engines with aftermarket camshafts.  
$99.95

Add:

Mopar 53021720AD Lifters Kit Mopar Performance Mopar Performance Lifter Kit 6.1L and 5.7L Hemi

Mopar Performance Lifter Kit 6.1L and 5.7L Hemi

FITS MOST DODGE & RAM VEHICLES EQUIPPED WITH 5.7L HEMI ENGINES and WITHOUT MULTI DISPLACEMENT SYSTEM or MDS NEW GENUINE OEM REPLACEMENT ENGINE VALVE TAPPET SET WITH BRIDGE, FOR 5.7L ENGINES WITHOUT MDS!!!! Complete kit to replace all 16 Lifters.   Availability: direct from manufacturer Shipping charges shown are for delivery within the Continental U.S. only. Shipment to other areas may be higher, and will be confirmed with you prior to shipment. For use with 03-08 GEN III 5.7L Hemi engines, and 03+ 6.1L Hemi engines.
$395.95

Add:

Mopar 53021720AD Lifters Mopar Performance Mopar Performance Lifters 6.1L and 5.7L Hemi

Mopar Performance Lifters 6.1L and 5.7L Hemi

The factory 5.7L & 6.1L Lifter assembly (non-MDS). This assembly includes a lifter cradle and 4 lifters. To complete a full non-MDS rebuild, order 4 of these. If you are installing a non-MDS camshaft in a 5.7L, you would need at least 2 of these to replace the MDS lifters. For use with 03-08 GEN III 5.7L Hemi engines, and 03+ 6.1L Hemi engines Availability: direct from manufacturer Shipping charges shown are for delivery within the Continental U.S. only. Shipment to other areas may be higher, and will be confirmed with you prior to shipment.
$99.95

Add:

SEALED POWER V4682 Valves Sealed Power SEALED POWER Exhaust Valves 5.7 Hemi

SEALED POWER Exhaust Valves 5.7 Hemi

Hemi engine Sold in packs of 2; DODGE RAM 1500 PICKUP 5.7L 345cid V8 FI (D) : Exhaust Valve Availability:  direct from Sealed Power Shipping charges shown are for delivery within the Continental U.S. only. Shipment to other areas may be higher, and will be confirmed with you prior to shipment
$47.95

Add:

Stanke Motorsports Hemi Collars Stanke Motorsports Stanke Motorsports 5.7L and 6.1L Hemi rocker collar

Stanke Motorsports 5.7L and 6.1L Hemi rocker collar

The Stanke Motorsports 5.7L and 6.1L Hemi Rocker Collars replace the little ring on the 03's and the stamped steel collar on the 04 -up engines. The precision machined aluminum, offset bored clamps are made to replace the OEM spring steel sleeves and will give you positive rocker arm alignment. Availability: direct from manufacturer Shipping charges shown are for delivery within the Continental U.S. only. Shipment to other areas may be higher, and will be confirmed with you prior to shipment.
$115.95

Add:

Stanke Motorsports Holddowns Stanke Motorsports Stanke Motorsports 5.7L/6.1L Hemi Shaft Holddowns

Stanke Motorsports 5.7L/6.1L Hemi Shaft Holddowns

Stanke Motorsports 5.7L, 6.1L Rocker Shaft Holddowns Availability:  direct from Stanke Motorsports Shipping charges shown are for delivery within the Continental U.S. only. Shipment to other areas may be higher, and will be confirmed with you prior to shipment
$225.95

Add:



Copyright © 2014 3rd Strike Performance. Powered by Zen Cart