Intake Manifolds

 



Qty. Model- Manufacturer Product Image Item Name Price
1 Mopar P5153340 Carb Conversion Mopar Performance 5.7L HEMI Conversion Package Carbureted Intake Kit

5.7L HEMI Conversion Package Carbureted Intake Kit

Mopar now has conversion packages in stock for customers looking to install a 2004 or earlier model year 5.7L HEMI engine into an older car or truck. Available in both carbureted and MPI versions, these packages have all the necessary fuel, intake and electrical management system components you need. Packages replace the factory plastic intake manifold and drive-by-wire throttle body with a more user-friendly aluminum intake and top-feed, cable-driven throttle body or carburetor, and include all of the gaskets, hoses and clamps necessary to complete the installation. Features: - Factory...
$5,359.95

Add:

1 Mopar P5153339 MPI Conversion Mopar Performance 5.7L HEMI Conversion Package Fuel Injection Intake Kit

5.7L HEMI Conversion Package Fuel Injection Intake Kit

  Mopar now has conversion packages in stock for customers looking to install a 2004 or earlier model year 5.7L HEMI engine into an older car or truck. Available in both carbureted and MPI versions, these packages have all the necessary fuel, intake and electrical management system components you need. Packages replace the factory plastic intake manifold and drive-by-wire throttle body with a more user-friendly aluminum intake and top-feed, cable-driven throttle body or carburetor, and include all of the gaskets, hoses and clamps necessary to complete the installation. Features: - Factory...
$5,749.95

Add:

1 Edelbrock 75284 Race Manifold Edelbrock Edelbrock 5.7L Hemi Dual Quad Race Intake Manifold

Edelbrock 5.7L Hemi Dual Quad Race Intake Manifold

Edelbrock Performer RPM dual-quad Air-Gap intake manifolds are designed to give your ride classic hot rod looks with modern-day performance. These manifolds stand just 1 5/8 in. taller than the original Edelbrock low-profile C-26 intakes and offer superior performance improvements in the 1,500-6,500 rpm range. The large runners feature Edelbrock's unique Air-Gap design that separates the runners from the hot engine valley for a cooler, denser charge. These aluminum dual-quad intake manifolds are available in your choice of natural or the popular EnduraShine finishes. Intake Section Included:...
$590.95

Add:

1 Edelbrock 20764 Race Manifold Edelbrock Edelbrock Performer 5.7L Hemi RPM Dual Quad Manifold w/Carbs

Edelbrock Performer 5.7L Hemi RPM Dual Quad Manifold w/Carbs

Convert from a single carburetor setup to a powerful dual-quad carburetor intake system. These Edelbrock Performer RPM Dual Quad Air-Gap manifold and carburetor kits provide everything needed to convert from a single carburetor intake to a powerful dual-quad carburetor intake system for small block Chevys. These kits include the new RPM Dual Quad Air-Gap intake, two 500 cfm Thunder Series AVS carburetors (one manual choke, one electric choke), Edelbrock high-tech progressive throttle linkage, a fuel line, and intake manifold gaskets. These kits are available in popular EnduraShine finish....
$1,599.95

Add:

1 Hilborn EFI-6.1CH8/EL Intake Kit Hilborn Hilborn Chrysler 5.7L and 6.1L Hemi EFI Kit

Hilborn Chrysler 5.7L and 6.1L Hemi EFI Kit

This EFI kit includes an ECU that allows you to tune your engine simply and accurately without a laptop computer. The fuel injector manifold features a split throttle shaft design for smooth performance with gasoline set-ups. STANDARD EFI KIT INCLUDES THESE ITEMS: Fuel injector manifold assembled with TPS, fuel rails, & vacuum kit, injectors, wiring harness, Carabine ECU, two fuel filters, steel ram tubes, Weldon electric fuel pump and pressure regulator, and an MSD tach adapter. The entire package is factory tested on a wet flow bench to match the engine fuel flow requirements and comes...
$5,529.95

Add:

1 Mopar 4510581 Carb Manifold Mopar Performance Mopar 5.7L Crate Motor Carbureted Single Plane Intake Manifold

Mopar 5.7L Crate Motor Carbureted Single Plane Intake Manifold

5.7L Crate Engine Single Plane Manifolds both Carb and EFI versions. EFI version is machined to accept injectors and MAP sensor. Both are drilled with the standard Holley pattern. Notes: For 5.7L Hemi. Not legal for sale on pollution-controlled vehicles or vehicles registered for highway use in California.
$1,190.95

Add:

1 Mopar 4510582 MPI Manifold Mopar Performance Mopar 5.7L Crate Motor EFI Single Plane Intake Manifold

Mopar 5.7L Crate Motor EFI Single Plane Intake Manifold

5.7L Crate Engine Single Plane Manifolds both Carb and EFI versions. EFI version is machined to accept injectors and MAP sensor. Both are drilled with the standard Holley pattern. Notes: For 5.7L Hemi. Not legal for sale on pollution-controlled vehicles or vehicles registered for highway use in California.
$1,109.95

Add:

1 Mopar 6.1L Manifold Mopar Performance Mopar 6.1L Intake Aluminum Manifold

Mopar 6.1L Intake Aluminum Manifold

Adding a Mopar 6.1L intake manifold to your 5.7L HEMI engine will increase its horsepower and torque. This price is for a used manifold. Mopar has discontinued this item and they are getting harder and harder to find... this is a bare intake. Does not include throttle body or accessories.
$1,595.00

... more info

1 Inertia 6.1L Intake Manifold Inertia Motorsports Mopar 6.1L Ported & Polished Intake Manifold

Mopar 6.1L Ported & Polished Intake Manifold

Port Matched for maximum flow without losing runner velocity, our ported & polished SRT-8 intake manifolds will give you that extra edge when it comes to maximizing the performance of your SRT-8. Core Charge Applies: A fully refundable $1500.00 core charge will be applied if we are shipping you a pre-ported and polished intake. The $1500.00 will be refunded upon return within 30 days of your stock intake in fully undamaged, reusable condition. Cleaning required. Please do not send in an oil soaked intake. Lead time of 2-3 weeks for porting/polishing. If you are having the intake...
$2,595.95

Add:

1 Mopar 5153556 DualQuad Manifold Mopar Performance Mopar Performance Dual Intake Quad Manifold (5.7L Hemi)

Mopar Performance Dual Intake Quad Manifold (5.7L Hemi)

Intake Manifold, Aluminum, Dual Plane, Dual Quad, Accepts AFB / AVS Style Carburetors. Use with Carburetor and Linkage Kit P5153904, 5.7L Hemi (2003-2008). This Dual Plane Mid-Riser Intake Manifold can accept two Edelbrock or AFB-style carburetors. Notes: For 5.7L Hemi. Not legal for sale on pollution-controlled vehicles or vehicles registered for highway use.
$459.95

Add:

1 RDP Sheetmetal Intake Manifold RDP RDP Sheetmetal Intake Manifold 6.1 and 5.7 Hemi

RDP Sheetmetal Intake Manifold 6.1 and 5.7 Hemi

$3,995.95

Add:

1 MMP-MM-4A Intake Adapters Modern Muscle 5.7 Eagle Intake Spacers for early 5.7L w/ 6.1 or Eagle Heads

5.7 Eagle Intake Spacers for early 5.7L w/ 6.1 or Eagle Heads

5.7 Eagle intake to 6.1 or Eagle head on early MDS (05-08) 5.7 Block Used to space intake for clearance to block. (See note below) These are made to match port size of intake and are therefore compatible with ported or non ported heads. Made from 6061 T6 aluminum. Comes with 6.1 gaskets for sealing head side of plates Includes Long Intake Bolts  NOTE: Due to variation in block casting may require fins on intake bottom to be clearance at front of intake and block closest point. Please check fit before tightening bolts. 
$299.95

Add:

1 Ram 6.1 Intake Install Kit MM-2B Modern Muscle 6.1L Hemi intake install kit 03-08 Mopar 5.7L Hemi

6.1L Hemi intake install kit 03-08 Mopar 5.7L Hemi

Moves your alternator and AC to the side to allow installation of a car style intake on a RAM truck application. Package includes new water pump and idlers. Timing cover core required for exchange.  Ask us about our ported intake packages, give the shop a call  Made to Order Minimum 3-4 Week Lead Time 
$899.95

Add:

1 MMP-57INT-PLATES Intake Adapters Modern Muscle Early 5.7L to 5.7L Eagle HEMI Intake Conversion Plates

Early 5.7L to 5.7L Eagle HEMI Intake Conversion Plates

3rd Strike Performance is proud to offer these early 5.7L HEMI intake conversion plates for individuals with ported heads. If you own a 5.7L HEMI produced between the years of 2003 and 2008 and want to install an updated 2009+ 5.7L HEMI Eagle intake this is the product for you. 
$299.95

Add:

1 MMP-57INT-PLATES Intake Adapter Modern Muscle Early 5.7L to 6.1L HEMI Intake Conversion Plates

Early 5.7L to 6.1L HEMI Intake Conversion Plates

3rd Strike Performance is proud to offer these early 5.7L HEMI intake conversion plates for individuals with ported heads. If you own a 5.7L HEMI produced between the years of 2003 and 2008 and want a different intake option this is the product for you. With these plates made by Modern Muscle Performance you can now install a aluminum 6.1L HEMI intake on your early 5.7L HEMI with ported heads.  Please select from the available options below. Once you have filled in all the required options and pressed the Update Options button you will be able to add this item into your shopping cart.
$299.95

... more info

1 MMP-57INT-PLATES-Orng Intake Ad Modern Muscle Early 5.7L to 6.1L HEMI Intake Conversion Plates With O-rings

Early 5.7L to 6.1L HEMI Intake Conversion Plates With O-rings

3rd Strike Performance is proud to offer these early 5.7L HEMI intake conversion plates with o-rings for individuals with ported heads. If you own a 5.7L HEMI produced between the years of 2003 and 2008 and want a different intake option this is the product for you. With these plates made by Modern Muscle Performance you can now install a aluminum 6.1L HEMI intake on your early 5.7L HEMI with ported heads. 
$299.95

Add:

1 Edelbrock 7250 Manifold Gaskets Edelbrock Edelbrock 5.7L-6.1L Hemi Intake Manifold Gaskets

Edelbrock 5.7L-6.1L Hemi Intake Manifold Gaskets

Edelbrock intake manifold gaskets offer precise sealing to make more power! Properly sealing an engine is vital to making maximum horsepower, and these intake gaskets will allow for optimum flow and performance! Edelbrock synthetic fiber composite gaskets are impervious to most chemicals, and when compressed, will conform to any imperfections on the sealing surface. A nitrile bead around each port opening makes the seal better, while their MP-2N Micropore technology makes them environmentally friendly! Produce maximum power and maximum sealing with Edelbrock intake manifold gaskets. Port...
$80.95

Add:

1 Edelbrock 8528 Manifold Bolts Edelbrock Edelbrock Intake Manifold Bolt Kit 5.7L and 6.1L Hemi

Edelbrock Intake Manifold Bolt Kit 5.7L and 6.1L Hemi

Finish the job right with Edelbrock quality bolt and washer kits. Edelbrock intake manifold bolts are designed specifically to work with their manifolds, including the Performer, Performer RPM, and Torker series. They feature reduced-hex heads for easy wrench access, an attractive cadmium finish for corrosion resistance, and hardened washers. All bolts and washers needed for manifold installation are included in these kits.
$16.95

Add:

1 FelPro MS96574 Intake Gasket Fel-Pro FEL-PRO Intake Manifold Gasket 5.7L Hemi

FEL-PRO Intake Manifold Gasket 5.7L Hemi

FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; With Felpro's limited 1-year warranty.
$15.95

Add:

1 Metco MBR0012 Crankcase Vent Metco Billet Crank Case Breather 5.7L and 6.1L Hemi Motor

Metco Billet Crank Case Breather 5.7L and 6.1L Hemi Motor

This crank case breather assembly replaces the cap on the oil fill tube located on the driver's side of the intake of the late model Hemi engine. The base of the breather is CNC-machined from billet aluminum for precise fit, and the included silicone O-ring is specially designed to prevent oil seepage at the base of the breather. The filter base is microfinished for surface protection and good looks, and is easily hand-polished to a mirror-like appearance. The removable filter element is a high-quality reusable unit from S & B Filters, and is securely retained in the filter base by a...
$56.99

Add:

1 Metco MBR0012-10 Adapter Metco Billet Valve Cover -10AN Adapter 5.7L and 6.1L Hemi

Metco Billet Valve Cover -10AN Adapter 5.7L and 6.1L Hemi

This valve cover adapterreplaces the originaloil fill tube on the factory valve cover. It isCNC-machined from billet aluminum for precise fit, andthe includedsilicone O-ring is specially designedto prevent oil seepage at the base of the adapter. The top of the adapter is machined to accept a #10AN hose end to facillitate the installation of a custom crank case evacuation system, PCV system, or for use with a vacuum pump. Total adapter length is 2.10". Installation: Each Metco Valve Cover Breather is engineered to fit your specific vehicle! Detailed installation instructions...
$56.99

Add:



Copyright © 2018 3rd Strike Performance. Powered by Zen Cart